本代码是利用读取的csv获取需要新增的ini信息，再读取ini，在原有的ini文件后面新增信息，但是不能在文件的后面插入。

中间涉及到字符串与日期时间类型的转换

# -*- coding: utf-8 -*-
"""
Created on Sun Jan  3 13:32:25 2021

@author: 10+1
"""

import ConfigParser
import csv
import datetime


#本程序可以负责利用csv表格生成对应ini及csv记录表，修改一共四个路径
csv_file=csv.reader(open('H:\\mission\\satelliateJiashan\\test2.csv','r'))
cfg1 = "H:\\mission\\satelliateJiashan\\TEST.ini"
conf = ConfigParser.ConfigParser()
conf.read(cfg1)
content=[]
sections=conf.sections() 
maxsections=int(sections[0])
for line in csv_file:
    print(line) #打印文件每一行的信息
   
    #时间的处理
    dateTime_s = datetime.datetime.strptime(line[1],'%Y-%m-%d %H:%M:%S')+datetime.timedelta(seconds=-20)
    dateTime_e = datetime.datetime.strptime(line[2],'%Y-%m-%d %H:%M:%S')+datetime.timedelta(seconds=20)
    str_s=dateTime_s.strftime("%Y.%m.%d %H:%M:%S")
    str_e=dateTime_e.strftime("%Y.%m.%d %H:%M:%S")
    print line[0],str_s,str_e
    conf.add_section(str(maxsections+1))
    maxsections=maxsections+1
    if line[0]=='SUOMINPP':
        line[0]='NPP'
    conf.set(str(maxsections),"description",line[0])
    conf.set(str(maxsections),"start",str_s)
    conf.set(str(maxsections),"stop",str_e)
    address=''
    if line[0]=='AQUA':
        address='C:/Program Files/ALMUR/bin/INI/AQUA_config.ini'
    elif line[0]=='NOAA20':
        address='C:/Program Files/ALMUR/bin/INI/NOAA20.ini'
    elif line[0]=='TERRA':
        address='C:/Program Files/ALMUR/bin/INI/Terra_720_DataPath-D-Alex.ini'
    #其他的卫星需要自行添加
    conf.set(str(maxsections),"config",address)
    print line[0],str_s,str_e,address
    line[1]=str_s
    line[2]=str_e
    line.append(address)
    content.append(line)

#输出文件csv，为了腾讯表格
csvfile = open('H:\\mission\\satelliateJiashan\\test2recorder.csv', 'wb')  #打开方式还可以使用file对象
writer = csv.writer(csvfile)
writer.writerows(content)
csvfile.close()
#s输出文件ini配置
conf.write(open("H:\\mission\\satelliateJiashan\\TEST2.ini","w"))